Knowledge BaseAudian Phone ArticlesHardwareVoIP PhonesCisco SPA122voiceUpdated 2/4/2026Cisco SPA122 Provisioning GuideDescription: This article will show you how to do the following:Setup a Cisco SPA122 device from factory defaultsMethods:Plug in the power adapter to the DC 5v port and the ethernet cable to the interet port.Plug your computer into the LAN (Yellow) port of the device.From that computer, open a browser window and navigate to 192.168.15.1.Sign in with admin / admin for the Username and Password.Click Voice at the top, and then select Provisioning from the left.Set Profile Rule to the http://z.audian.com/p/<Account Prov String>/spa$MA.cfgSet the Transport Protocol dropdown to HTTP.Click Submit, wait 5 minutes, if still not working reboot again by going to http://192.168.15.1/admin/reboot, and wait 5 more minutes. Migrated from Confluence on 2026-02-03 Original Confluence Article
