How To - Factory Reset Yealink W52P IP DECT Phone | Audian Support
voice
Updated 2/4/2026
How To - Factory Reset Yealink W52P IP DECT Phone
Description:
This article will show you how to do the following.
Factory reset the Yealink W52p Handset and Base
NOTE: When factory resetting the Yealink W52p base station or de-registering a handset, you will need to reconfigure the handset/s to talk with the base station again.
Methods:
Reset Base Station
Power off the base station.
Hold down the Connect button.
Power on the base station while holding down the Connect button.
Once the Power, Network, and Phone lights are solid let go of the Connect button.
Reset Handset
Step 1: De-Register handset
On the handset, press the Ok button.
Navigate to Settings > Registration > De-reg. Handset, Enter the PIN “0000” to confirm.
Highlight the handset to de-register a press the Select button.
When the De-register message appears, press Yes.
Step 2: Reset Handset
On the handset, press the Ok button.
Navigate to Settings > System Settings > Handset Rest. > OK
