Knowledge BaseAudian Phone ArticlesHardwareVoIP PhonesYealinkYealink PhonesYealink W52P IP DECT PhonevoiceUpdated 2/4/2026How To - Register Handsets W52P IP DECT PhoneDescription:This article will show you how to do the following.Register a handset to the base station.Methods:Verify all 3 lights on the base unit are lit up.The handset will say “Press Page Button on Base for 2s, then OK”.Press the Connect button until the base unit light starts flashing.Press OK on the handset.Select Register Handset.Once it finds the base, press OK and enter the PIN# 0000.Once the handset is registered.Click the Account tab at the top of the screen.Click Number Assignment on the left.Ensure that the new handset is assigned to the proper lines for both Incoming and Outgoing lines.Click Confirm Changes to save. Migrated from Confluence on 2026-02-03 Original Confluence Article