Knowledge BaseAudian Phone ArticlesAudian PortalPBX Manager ArticlesvoiceUpdated 2/4/2026Setup A PBXDescription: This article will show you how to do the following.Add a PBX to your account.Verify PBX Credentials.Test your PBX SystemMethods: Current PlatformLogin to the Audian PortalClick on the Apps button in the top right of the screen.Click PBX Connector.If a PBX is already setup on the account and a new one needs to be added, click Add PBX at the bottom right. Otherwise, skip to the next step.Select your PBX System.Name the PBX System.Select if your IP is static or not.If Yes Enter in the Static IPv4, IPv6 and Static PortIf No Enter in your username and password.Click NextSet the Invite FormatTurn Compatibility ON or OFFClick Submit LegacyLog into the Audian Portal. Click PBX Connector.Click Add Server.Select the PBX Manufacture that matches your PBX.Fill in the following.Create a UsernameCreate a PasswordThis PBX will be known as (Name)Click Save PBX Installation ChecklistUse this checklist to test your newly installed PBX system.Make outbound call to a line outside Audian's network.Verify dial toneVerify ring backVerify two way audioPut call on hold, verify hold music and retrieval from holdMake inbound callVerify dial toneVerify ring backVerify two way audioPut call on hold, verify hold music and retrieval from holdDial 811 to test 911The number read back to you should be the E911 caller ID. Migrated from Confluence on 2026-02-03 Original Confluence Article